The GN3200W is the twin spindle version of the GN3200 which, equipped with a high speed loader, makes even higher productivity available. The machine width is 33% narrower than previous Miyano models and the required floor space has been reduced by 27%, realising significant space saving.
A wide choice of infeed/outfeed devices, single or double high speed gantry loaders, transfer and turnover units makes the machine the best choice to meet specific automation needs.
The basic concept in designing the machine is preventing thermal displacement over time by transferring the heat of machining to the machine body. This is achieved by a frame and bed with a thermally symmetric design, backed up by a wing-type headstock and a separate coolant tank.Download Catalogue
|Machining Capacity and Chuck System|
|Power Chuck||Pneumatic||3″(4″) Precision Chuck|
|Maximum diameter of Collet Chuck||Stationary(with Pad)||ø35mm|
|Pull type(with Pad)||ø40mm|
|Maximum Machining Length||50mm|
|No of Turret||2|
|Spindle motor(15min./cont.)||L/R-Spindle||2.2/1.5 kW|
|Spindle Speed Range||L/R-Spindle||80 – 8,000min-1|
|No of Turret||2|
|Type of Turret||Horizontal linear turret|
|Shank Height of Square Turning Tool||□10mm, □12mm, □16mm|
|Diameter of Drill Shank||ø20mm|
|Slide Travel||X1 axis, X2 axis||180mm|
|Z1 axis, Z2 axis||200mm|
|Spindle Center Height||875mm|
|Floor Space(Width × Length)||1,400mm×1,477mm|
Feel free to get in touch with us by phone or online if you have any questions or need advice about any of our products or services.Submit Enquiry
Here you can access information on any products you are looking for by bar or chuck size, by machine type, or by other particular specifications.Product Matrix
Our machines cover 1mm to 64mm and above. Fast to set, quick to changeover and easy to use our technology represents a sound investment. We invite you to take a look at our range.