The LX-08C was primarily designed for mid-size flange work and shaft work. It features a rigid mono-cast iron 30°slant bed to give an efficient chip flow.
The LX-08C is with 10-station turret.
Tail stock can be chosen from three different types. These options enable you to do efficient, heavy-duty machining on simple work pieces as well as hard material work pieces.
High-powered machining: a 10-station turret with powerful curvic coupling and positive tool-holding by direct wedge-clamping on five tool stations.
The main spindle incorporates double-row cylindrical precision bearings in the front, and angular-contact precision trust ball bearings in the rear. The extra rigidity provides stable, high
precision turning through-out the entire speed range. As a result, additional grind-ing process can be eliminated.
A tail stock can be chosen from three different types to suite your needs: quill-type with a MT-4 live center for general-purpose center holding, a high-rigidity quill-type with a built-in center for extra center-holding force, and an extra-long slide type with a longer slide travel.
Auto gauging system
Mount the touch sensor to the turret face, auto-measure the work-piece after the cut, then wear offset the tool and control the tool life by combination with Custom Macro-B and software.
High Pressure Coolant
High-Pressure Coolant works for both ID and OD tools. Especially effective on ID tools with oil hole cutting tool (Drill, boring bar) for cooling and chip disposal.
|Maximum machining diameter||210mm|
|Maximum Machining Length||320mm|
|Spindle Speed Range||40 – 4,000 min-1|
|Type of Turret||10St.Turret|
|O.D. tool mount method||direct tool mount|
|Shank Height of Square Turning Tool||□25mm|
|Tool hole diameter||ø40mm|
|Slide Travel||X axis||175mm|
|Tail-stock taper size(Opt.)||MT4|
|Quill type tail-stock||Max. thrust force||3116N(318kgf)|
|Slide type tail-stock||Max. thrust force||5,488N(560kgf)|
|Floor space(machine only)||2,035×1,690mm|
Feel free to get in touch with us by phone or online if you have any questions or need advice about any of our products or services.Submit Enquiry
Here you can access information on any products you are looking for by bar or chuck size, by machine type, or by other particular specifications.Product Matrix
Our machines cover 1mm to 64mm and above. Fast to set, quick to changeover and easy to use our technology represents a sound investment. We invite you to take a look at our range.