Detachable Guide Bushing and 15,000 min-1 High-speed spindle.
Machining using a guide bushing is a useful method for long, slender work-pieces. On the other hand, using a interchangeable guide bushing with short work-pieces leaves a long remnant bar, increasing material costs. The optimum machine configuration differs according to the work-piece to be machined, and up until now a variety of different machines have been required. The L12 solves this problem.
It is a simple matter to fit or remove the interchangeable guide bushing, so the machine configuration can be changed to suit the work-piece to be machined. As an automatic lathe that encompasses two roles in a single unit, it can be used to machine both long and short work pieces effectively. It also shows uncompromising performance as a machine for high-speed, small-diameter applications.
It shortens cycle times with a front spindle capable of high-speed rotation of 15,000 min-1 and 10,000 min-1 rotary tools. The L series
that has built Cincom’s history is now creating the new ‘standard’ in automatic lathes for function and performance.
This machine has LFV inside, click here to find out more about it.
|Maximum machining diameter||ø12mm|
|Maximum machining length||GB machine||135mm/chuck|
|Maximum drilling diameter for main spindle||ø8mm|
|Maximum tapping diameter for main spindle (tap,die)||M6|
|Main Spindle through-hole diameter||ø20mm|
|Maximum drilling diameter for gang rotary tool||ø5mm|
|Maximum tapping diameter for gang rotary tool||M4|
|Gang rotary tool spindle speed||10,000min-1|
|Maximum chuck diameter of back spindle||ø12mm|
|Maximum protrusion length of the back spindle workpiece||30mm|
|Maximum drilling diameter in back machining process||ø6mm|
|Maximum tapping diameter in back machining process||M5|
|Back spindle speed||10,000min-1|
|Number of tools to be mounted||Max.27|
|Tool size||Turning tool||□10mm|
|Rapid feed rate||All axis||35m/min|
|Motors||For spindle drive||2.2/3.7kW|
|For tool spindle drive||0.75kW|
|For back spindle drive||0.4/0.75kW|
|For cutting coolant oil||0.25kW|
|Input power capacity||8kVA|
|For rotary tool drive of Back tool post||0.5kW|
|Maximum drilling diameter for back tool post rotary tool||ø5mm|
|Maximum tapping diameter for back tool post rotary tool||M4|
|Rotary tool spindle speed of back tool post||9,000min-1|
[hotspot id=515 /]
Feel free to get in touch with us by phone or online if you have any questions or need advice about any of our products or services.Submit Enquiry
Here you can access information on any products you are looking for by bar or chuck size, by machine type, or by other particular specifications.Product Matrix
Our machines cover 1mm to 64mm and above. Fast to set, quick to changeover and easy to use our technology represents a sound investment. We invite you to take a look at our range.